Truunion Mounted Ball Valve

Next > >

<< Previous

Send Inquiry

Product Code : 24

Product Description

Specifications & Standards

Design & Manufacture
Body & Trim
Casting Inspection
Testing
Fire Safe
Valve Bore
Flange Dimensions
Drain / Vent / Bypass
SW END
BW END
Thread END
Face to Face

- BS 5351 / API 6D/ANSI B16:34
- Nace MR 01-75
- MSS SP-53, 55, 59, 94
- BS 6755 Part-I / API 598
- API 607, API 6FA / BS 6755 Part II
- API 6D
- ANSI B16.5 / B16.47 / MSS SP-44
- MSS SP-45 / API 6D
- ANSI B16.11
- ANSI B16.25 / B31.8
- ANSI B 1.20.1 / ANSI B 2.1
- ANSI B16.10 / API-6D

Valve Type & Configuration

Ball valves shall have a spherical ball that moves in a plane perpendicular to the direction of flow.

Full opening through ball valves shall have a circular bore in the spherical ball that allows a sphere to pass with a nominal size not less than ½" nominal diameter. Reduce opening through Ball valve shall have a semi circular bore in the spherical ball that allows a phere to pass with a nominal size not less than 10" nominal diameter, Unless otherwise specified by customer.

Reduce opening valves with a non circular opening through the spherical ball shall be supplied with a minimum opening as agreed by customer.

Pressure & Temperature Rating

Valves manufactured shall be furnished in one of the following classes

- PN 20 (class 150)
- PN 50 (class 300)
- PN 64 (class 400)
- PN 100 (class 600)
- PN 150 (class 900);
- PN 250 (class 1500)
- PN 420 (class 2500);

Pressure-temperature rate is for above class rated valves shall be in accordance to ASME-B 16.34/EN 1092-1, Other than shall be determine for a material properties in accordance with the applicable design standard.